Chat with us, powered by LiveChat
4mm Toughened glass, mastic sealed with quality beading

The Romney Double Door Shed

Spacious double door garden shed designed for storage of larger items such as ride-on mowers. Slightly higher eaves make this the perfect middle ground between shed and workshop.

For narrower bulidings and single door option see our 'Kent Apex'

MINIMUM 6' WIDE DUE TO DOUBLE DOORS

FOR FULL SPECIFICATION SEE BELOW

 

 

  • Two 30'' x 6' Ledge and Braced Doors as Standard
  • 6' and 7' GABLE ENDS RECEIVE TWO 27" DOORS
  • Apex Desgin
  • Option For No Window
  • Versitile
  • Optional Extras Available
  • Finance Available
Full Specification
Delivery Van
Delivery
Do we deliver to your area? Enter your postcode below

Delivery/ Installation times are approximately 4-5 weeks from order

CUSTOMISE YOUR SHED

SELECT DIMENSIONS
Orientation
Width in feet
Depth in feet
SELECT DOOR POSITION
SELECT CLADDING
SELECT FRAMING

Framing is the structural skeleton of your wooden shed, used to support the wooden panels and roof of your shed. The greater the depth of framing used will increase your sheds life expectancy, durability and stability. 

SELECT DOOR TYPE
SELECT WINDOW TYPE
SELECT FELT
SELECT SECURITY
SELECT INSTALLATION
SELECT OPTIONAL EXTRAS
  • Two 30'' x 6' Ledge and Braced Doors as Standard
  • 6' and 7' GABLE ENDS RECEIVE TWO 27" DOORS
  • Apex Desgin
  • Option For No Window
  • Versitile
  • Optional Extras Available
  • Finance Available

Spacious double door garden shed designed for storage of larger items such as ride-on mowers. Slightly higher eaves make this the perfect middle ground between shed and workshop.

The Romney garden shed is made from high quality Red Wood Tongue and Groove Pressure Treated cladding. Standard framing are 47mm x 35mm treated eased edge framework with diagonal supports for strength and stability, The roof and floor are made from Pressure Treated 12mm Tongue & Groove boards which gives strength and durability and it is also moisture resistant. The floor has runners (50mm x 25mm Pressure Treated battens) spaced approximately 1' apart to give adequate air flow. The Roof has main and Intermediate beams for roof strength and is overlaid with a good quality green mineral felt.

MINIMUM 6' WIDE DUE TO DOUBLE DOORS.

NUMBER OF WINDOWS AS STANDARD VARY DEPENDING ON THE SIZE; IF UNCLEAR DO NOT HESITATE TO ASK US. 

For narrower bulidings and single door option see our Kent Apex here.

  • 100% Pressure Treated Timber Throughout
  • Standard 12mm T & G Shiplap
  • 47mm x 35mm Planed Treated Framing Throughout
  • External Eave Height 1990mm
  • Internal Eave Height 1880mm
  • Pressure Treated T & G Roof and Floor
  • Diagonal Bracing
  • Two 30'' x 6' Ledge and Braced Doors as Standard
  • 6' and 7' GABLE ENDS RECEIVE TWO 27" DOORS
  • Polyester Green Mineral Felt
  • Joinery Made Window Frames With Cills
  • 4mm Horticultural Glass
  • Minimum 3x2 Roof Purlins
  • 4x2 Truss as Required
  • Any Size Available 
  • Galvanised Door Furniture
  • Stainless Nails Used in Construction
  • Shed Frame Screwed Not Nailed

We only use the best quality slow-grown Red Spruce Timber from our partners in Sweden.
All of our timber has been penetrated with wood preservative to enhance protection in terms of the prevention of rot, decay and insect and fungal attack. If timber is left untreated, the quality can deteriorate rapidly over time as a result of exposure to the elements of weathering and moisture.
Despite the care we take in importing & Pressure treating the best timber possible, all timber is porous and therefore can absorb water, swell, shrink, crack and twist throughout its lifespan.

However, together we can help minimise these. These include:

  • Double Nailing
    We use Stainless Steel Nails double nailed in each board in each upright to help minimise movement and twisting
  • Uprights
    We use strong timber at close intervals to support the timber cladding.
  • Water Repellent Treatment
    You can customise the building with a colour of your choice or decide to keep it clear, but all cladding timber will need a water repellent treatment to help stop water penetration and moisture build-up. Moisture build-up will occur naturally especially during winter months and in some cases will cause dampness and mould. Water repellent treatment will help minimise this and if any mould occurs, this can normally be remidied by wiping clear with a mild bleach soultion and ventilating the building when possible.
  • Regular Maintenance
    Your Building should be reletively maintenance free, however as with everything it does need to be kept an eye on! When the building does move slightly throughout the year, doors and windows may need adjusting. Windows have been silicone sealed on manufacture but may need resealing if required.
    Dont be afraid to lubricate locks & hinges. Being out in the elements is a strain on all materials!
    Keep an eye on roofing materials. Felt will particuarly need keeping an eye on, although we provide a good quality material, felt again does contract and expand during the seasons and over time can tear and crack. Once this happens it is more likely the shed will start to leak. Therefore replacement will be necessary.
    Other roofing materials we offer do offer some sort of warranty, so if you feel your building is leaking from the roof, please get in touch for advice.

Enter your postcode to see if you qualify for free delivery.

ASK A QUESTION

Share with friends
Contact us
Contact us