The Cambridge Shed
The Cambridge shed has an asymmetrical roof offering an alternative option to the run of the mill shed designs.
The Layout of this building is different to standard sheds, the FRONT is the first size and the SIDE is the second size, for example: 8' x 6' is 8' front with windows and door; going back 6'.
FOR FULL SPECIFICATION SEE BELOW
![]()
Watch how to use our NEW Shed Configurator HERE
- 6FT & 7FT WIDE ONLY HAVE ONE WINDOW
- 6FT WIDE MODELS RECEIVE 27" DOOR
- 12mm Cladding (16mm Nominal) as standard
- Option For No Window
- Unique Asymmetrical Apex Design
- Offset Door Positions
Delivery
- 6FT & 7FT WIDE ONLY HAVE ONE WINDOW
- 6FT WIDE MODELS RECEIVE 27" DOOR
- 12mm Cladding (16mm Nominal) as standard
- Option For No Window
- Unique Asymmetrical Apex Design
- Offset Door Positions
- Optional Extras Available
- Finance Available
The Cambridge shed has an asymmetrical roof offering an alternative option to the run of the mill shed designs.
With the additional height offered in producing this, we are able to offset the door to the left or right as your garden dictates.
The Cambridge garden shed is made from high quality Pressure Treated Red Wood Tongue and Groove cladding. Framing is 47mm x 35mm as standard with diagonal supports for strength and stability. The floor is made from 12mm Tongue & Groove boarding. The floor has 25x50mm bearers spaced approximately 1' apart to give adequate air flow. The Roof has main and Intermediate beams for roof strength, 12mm Tongue & Groove boards and is overlaid with a good quality green mineral felt.
The Layout of this building is different to standard sheds, the FRONT is the first size and the SIDE is the second size, for example: 8' x 6' is 8' front with windows and door; going back 6'.
**Please Note that on 6ft & 7ft Wide sheds only have 1 Window**
![]()
- 100% Pressure Treated Timber throughout,
- Standard 12mm T & G Shiplap,
- 47mm x 35mm Planed Treated Framing throughout,
- Pressure Treated T & G Roof and Floor,
- Diagonal Bracing,
- Single 30'' Standard Door,
- 27" DOOR AS STANDARD ON 6FT WIDE MODELS,
- Polyester Green Mineral Felt,
- Joinery Made Window Frames with Cills,
- 4mm Horticultural Glass,
- Minimum 3x2 Roof Purlins,
- Galvanised Door Furniture,
- Stainless nails used in construction,
- Shed Frame screwed not nailed,
- Eaves Height 5ft 8'',
- Ridge Height 6ft 8'',
- The Layout of this building is different to standard sheds, the FRONT is the first size and the SIDE is the second size, for example: 8' x 6' is 8' front with windows and door going back 6'.
We only use the best quality slow-grown Red Spruce Timber from our partners in Sweden.
All our timber has been penetrated with wood preservative to enhance protection in terms of the prevention of rot, decay, and insect and fungal attacks. If timber is left untreated, the quality can deteriorate rapidly over time because of exposure to the elements of weather and moisture.
Despite the care we take in importing and pressure treating the best timber possible, all timber is porous and therefore can absorb water, swell, shrink, crack, and twist throughout its lifespan.
However, together we can help minimise these by:
Double Nailing:
- We use Stainless Steel Nails double nailed in each board in each upright to help minimise movement and twisting.
Uprights:
- We use strong timber at close intervals to support the timber cladding.
Water Repellent Treatment:
- You can customise the building with a colour of your choice or decide to keep it clear, but all cladding timber will need a water repellent treatment to help stop water penetration and moisture build-up. Moisture build-ups will occur naturally, especially during winter months, and in some cases will cause dampness and mould. Water repellent treatment will help minimise this and if any mould occurs, this can normally be remedied by wiping clear with a mild bleach solution and ventilating the building when possible.
Regular Maintenance:
- Your Building should be relatively maintenance free, however, as with everything it does need to be kept an eye on! When the building does move slightly throughout the year, doors and windows may need adjusting. Windows have been silicone sealed on manufacture but may need resealing if required.
- Don't be afraid to lubricate locks and hinges. Being out in the elements is a strain on all materials!
- Keep an eye on roofing materials. Felt will need particular attention: although we provide good quality material, felt does contract and expand during the seasons and over time can tear and crack. Once this happens, it is more likely the shed will start to leak, and replacement will be necessary.
- For other roofing materials we do offer some level of warranty, so if your building is leaking from the roof, please get in touch for advice.
Enter your postcode to see if you qualify for free delivery.