Chat with us, powered by LiveChat
royal_exterior_600_wood_finish_stone_grey

Protek Royal Exterior Wood Finish - Stone Grey

The soft light grey of pebbles shining at the bottom of a stream. Stone Grey as another shade that looks good on its own and compliments all of the other shades in the Royal Interior and Exterior ranges.

 

Full Specification
Delivery Van
Delivery
Do we deliver to your area? Enter your postcode below

Delivery/ Installation times are approximately 5-6 weeks from order

CUSTOMISE YOUR SHED

SELECT DIMENSIONS
Width in feet
Depth in feet
SELECT DOOR POSITION
SELECT CLADDING
SELECT FRAMING

Framing is the structural skeleton of your wooden shed, used to support the wooden panels and roof of your shed. The greater the depth of framing used will increase your sheds life expectancy, durability and stability. 

SELECT DOOR TYPE
SELECT WINDOW TYPE
SELECT FELT
SELECT SECURITY
SELECT INSTALLATION
SELECT OPTIONAL EXTRAS

• Long-lasting protection
• Low VOC (Volatile Organic Compounds)
• Low odour
• Water-based with linseed oil – natural renewable resource
• Translucent – allows wood grain to show through
• Rich long-lasting colour
• Water resistant with mould and fungal protection
• Microporous high-build coating

The soft light grey of pebbles shining at the bottom of a stream. Stone Grey as another shade that looks good on its own and compliments all of the other shades in the Royal Interior and Exterior ranges.

Royal contains a naturally derived polyurethane based on linseed oil and a high-quality cross linking acrylic. Water repellent finish that minimises the effects of weathering and UV resistant. Royal is quick and easy to use with no need for an undercoat or primer.

 

Coverage: 1 Litre will cover approximately 8m²

Advice: It is recommended that 2 – 3 coats be applied. If 1 coat is to be applied for a translucent look, apply Royal Clear on top to produce a harder surface finish. Protek Royal is a high-build formulation so each extra coat increases the colour and sheen. If applying to bare timber a knotting agent should be used prior to application. When applied to floorboards a top coat of breathable polyurethane sealant or varnish should be applied to protect against heavy foot traffic.

 

Enter your postcode to see if you qualify for free delivery.

ASK A QUESTION

Share with friends
Contact us
Contact us